|
|
|
|
| |
4080 - Total Hydrocarbon in Water Analysis System
What do the error codes on the 4080 analyzer mean? The following is an explanation of the error codes for the self-test: 4020_4080_error_codes.pdf Please note the comment that the preamp results for the self-test are only valid at startup, before the FID has been actuated. It is possible to manually deplete the fuel to the FID, allow it to cool and perform a self-test during run time however. Top of page |
||||||
|
Document Control & Training (password) e-mail us: ask_tai@teledyne.com Copyright © 2010 Teledyne Technologies Incorporated. All rights reserved. Teledyne Analytical Instruments • 16830 Chestnut St • City of Industry, CA 91748 • USA |
