A: Please refer to this document: MFC_End_of_Life_Determination.doc
A: The weight of the model 3020T is 145 pounds.
A: There are C3 connections in the mixture (Acetone ). The epoxy in our cell is not resistant to Acetone. The sensor cannot be used for this application.
A: The power consumption should be 130 Watts max.
As to the current load, it would depend in voltage setup: for 120VAC it should be about 1.1 A max, for 220VAC it should be about 0.60 A max.
Beyond this of course there is a start up transient.
A: Yes
For additional questions, please contact Technical Support.
